Montana Dept. of Transportation hopes to make portion of Hwy 84 safer

MADISON COUNTY — A rise in accidents urged the Montana Department of Transportation (MDT) to conduct a safety study along Highway 84 near Norris. MDT is conducting the safety study on a portion of the highway from the Warm Springs Boat Launch to the Red Mountains Campground. “I used to travel it once or twice a month, but lately it’s been on a daily basis,” said Linda Browne. “It has curves. It has dangerous spots. It has a lot of beauty. It has a lot of wildlife,” she said, describing the roadway. Brown is glad MDT is doing a safety study on the highway but wants to make sure it brings about real results. “My fear is a lot of focus on the danger of the road, that there’s problems, there’s issues and there’s no solutions,” Browne explained. “Other options we’re looking at is to realign the roadways around the mountains, around the hills that are out there and then also possible even looking at structures,
possibly a tunnel and possibly a bridge that will change the whole alignment out there,” said Jason Senn, the MDT project manager. “Because of the way MDT plans their projects, they go on a five year basis. So, if the study’s completed in 2021, we can identify a project. The earliest we can construct this project is 2026,” Senn explained. “It’s really important to slow down. It’s not meant to be driven full-on, 70 miles per hour the whole way,” she said. MDT encourages residents to participate, voice their concerns at its public meetings, and visit its website.

Transportationof overweight goods in extreme road conditions. For example, the cargo exceeds the limition of bridge weight, thelimition ofthe road load is not enough, the surface of the road is not smooth,the width of the road is too narrow, and a lot for curves.

According tothe shape and weight to distribution of the goods, the car body can bereorganized and the number and shape of the shaft can be selected. The load canbe effectively distributed. It can be extended for carring overweight cargos,and the weight can over 5,000 tons. It is mainly used for transporting of largemilitary aircraft carrier, submarine and overlarge oil platforms. It’s a supergiants in transportation equipment. Overweightsuspension structure, with the same width, the maximum load capacity of thetire, single-axis bears up to 40 tons. Multi axlescoordinated steering function, through the narrow and sharp road conditions, itcan automatically and accurately steer with the tractor head, can also use theremote control to control the steering, all tires can reach a maximum turningangle of 52 degrees, extremely strong; also equipped with lane lineidentification The lane line deviatesfrom the alarm system and cooperates with the tractor automatic driving systemto realize the automatic driving of the train. The whole carelectronic control system adopts embedded CAN bus control, equipped withvarious height and corner encoders, one-button control, intelligent steeringand lifting and leveling functions. The vehicle axles are automatically liftedand lowered by undulating and inclined roads, and the loading platform canautomatically Balance, prevent rollover,and equipped with remote control system, real-time monitoring and remotediagnosis of device data through 5G mobile network. The whole caris equipped with EBS electronically controlled braking system. It also has thesame response capability of sensitive braking as a car under heavy load, whichgreatly improves safety.

Our company Multi axle modular semi trailer,the front gooseneck adoptsthe anti-seismic design of the airbag, and realizes the lifting function of theair bag and the hydraulic cylinder by carrying the air and oil pressuresuspension of the axle, and achieves excellent shock absorption effect incombination with the gooseneck lifting, which can make the loading cargo insuspension state. It has a large loadand can be used with tractors of various saddle heights. It can reduce thevibration inside the car to less than 5g. It is suitable for the transportationof ultra-high precision semiconductor chip processing equipment, ensuring theaccuracy requirements of transporting goods, and can serve Huawei. The company, BOE Company’s new semiconductorchip and mobile phone screen project equipment transportation, the currentproducts have been sold to Japan, for the Canon company transport lithographymachine.    The rear axle is equippedwith the advanced ECAS electronically controlled air suspension system, whichhas excellent shock absorption performance and anti-rolling function of thevehicle, and can save 25% of air consumption.    The original precisionsteering device is configured to make the handling of goods smoother.    The whole car is equippedwith small mahogany (pineapple grid) floor, the texture is hard, the earthquakeresistance is strong, it is not suitable for wear, and the whole vehicle islightweight.



Post time: Mar-05-2020
WhatsApp Online Chat !