Ship Transport –Scrapping ships state-of-the art environmental protection.

“While ships make up just 5% to 7% of global transport oil demand, according to Goldman Sachs, they emit half of sulfur from transport because they use the dirtiest fuel—literally the bottom of the barrel,” Wall Street Journal reporter Spencer

If shipping owners don’t covert to liquefied natural gas, IMO wants them to either to burn diesel which operates trucks and trains or install expensive scrubbers like the ones on coal-fired power plants.
Companies like Tote, which hauls cargo in over-the-road truck trailers between Tacoma and Anchorage, have been converting fleets to LNG. “These vessels are the most advanced, environmentally responsible vessels of their kind – reducing particulate matter by 99 percent, vessel sulfur emissions by 98 percent, nitrogen oxides by 91 percent and CO2 by 35 percent,” TOTE reports.
Container shipping giant Hapag-Lloyd is testing LNG. The German company is retrofitting its 15,000 container ‘megaship’ Sajir to cleaner burning LNG becoming the first in the world to convert a ship of this size.
Older vessels unable to cost-effectively meet the standard will be scrapped—-hopefully in American shipyards which better protect workers, pay family wages with benefits, and have state-of-the art environmental protection.

Since2007 yzvulcan has established, it has been making that intelligent large-sizetransportation equipment (semi-trailer) and parts. It has many years of production experience and industry-leading manufacturing ability.

Vulcan Machinery Manufacturing Co., Ltd. Reminds Vehicles and Ships Safely:

Cars and animal-powered vehicles should strictly implement the traffic rules formulated by the public security department. Drivers should have a driving license and non-drivers are not allowed to drive.
It is forbidden to store gasoline, flammable materials and smoking in the garage, and sufficient fire fighting equipment shall be provided. After the fire is overhauled, a comprehensive inspection shall be conducted, and no tinder may be left.
By car, before the project starts, a special person should be appointed to inspect the transportation roads and determine the transportation route. Transport personnel should be informed in detail of slopes, detours, muddy ice and snow where accidents are likely to occur, and repairs and signage should be established in advance if necessary.
Transport by ship should be loaded according to the load capacity and balance of the ship, and no overload is allowed. When transporting major equipment, safety measures should be formulated in advance.
The springboard for getting on and off the boat should be wide and stable. The equipment should be stacked in sequence and fastened with ropes. Before loading and unloading, the person in charge of work should carefully check and study the loading and unloading methods and storage locations, and explain to the staff in detail. All grease and flammable materials should be properly kept and fire prevention measures should be taken.
Ships are not allowed to sail in strong winds of level 6 or above, and should be anchored ashore.
The ship shall be provided with life-saving equipment and fire-fighting equipment. Passengers should abide by the boarding regulations and prohibit swimming into the water. The boat was not stopped and was not allowed to get on or off. Personnel on board should be designated to maintain security.
Ship drivers should have a driving license, and non-drivers are prohibited from sailing.
The use of special motor vehicles (battery trucks, forklifts, dump trucks, etc.) in the plant shall comply with the following regulations;
It should be driven and maintained by a person, and the driver should pass the examination of the relevant department and obtain a driving license before driving.
Before driving, check whether the brake, horn, and direction mechanism are normal. Forklifts should also check the lifting frame and tilt mechanism, and the fake action should be normal.
Do not overload. Shipment items should be fastened with ropes or padded with wooden blocks. Passengers should pull the handles firmly, and their bodies should not be allowed to get out of the sides of the car. Unrelated personnel should not be allowed to take the car. The car is not parked. Dump trucks and forklifts are not allowed to carry people.
While the vehicle is running, others are not allowed to chat with the driver. Before starting the vehicle, you should honk. When encountering narrow, uneven and heavy vehicles, the vehicle speed must not exceed 5km / h, and empty vehicles must not exceed 10km / h. When making a turn at an intersection, decelerate the horn and move to the right, and make a gesture or forecast signal. Pay attention to maintaining the distance between vehicles and preparing for braking. When parking and leaving, you should cut off the power or remove the handle.
When the forklift is transporting, the forklift should be lowered. After the work is completed, the shovel should be placed at the lowest position.


Post time: Jan-07-2020
WhatsApp Online Chat !